Skip to main content
The Adjust Facings feature allows you to incorporate the Force to Inventory functionality found in the BlueYonder Space Planning application into your MissionControl process.

Why you would use this feature

If you need to automatically adjust facings or capacity to fill out planogram space or meet specific inventory goals, this feature will help you do that.

Feature Options

What are you trying to accomplish with this adjustment?

In the dropdown list, you can choose from 14 different goals to use for adjusting facings of positions on your planograms.

1) Set number of facings… to 1 facing

Adjust facings in any direction (high, wide, or deep) to 1 facing. The ability to adjust facings in any direction is dependent on the merchandising options for the position and its related objects (such as fixture). For example, you cannot set the number of facings deep to be 1 if the Merchandising (Z) Number of units deep setting is set to Fill available space.

2) Set number of facings… to target

Adjust facings in any direction (high, wide, or deep) to meet or exceed the calculated Target Inventory value for each product. The calculated target is based on the Inventory Model selected for the planogram or project.

3) Set number of facings… scaled by a factor

Adjust facings in any direction (high, wide, or deep) by multiplying them by a factor you specify. For example, if the scale factor is set to 2, all facings will be doubled. This may result in shelves that are overfilled.

4) Fit to fixture space… in proportion to existing

Add facings in any direction (high, wide, or deep) to fill fixture space without overfilling the fixtures. Facings are proportionally adjusted based on the number of existing facings. A position with a high number of facings is expanded more than a position with a lower number of facings. Additional options are available for managing facings that are manually determined.

5) Fit to fixture space… towards target facings

Add facings in any direction (high, wide, or deep) to fill fixture space without overfilling the fixtures. Facings are adjusted for products having the greatest difference between their Capacity and Target Inventory values. Additional options are available for managing facings that are manually determined.

6) Fit to fixture space… making space proportional to measure

Adjust facings in any direction (high, wide, or deep) proportionally based on a selected measure such as Sales. Additional options are available for managing facings that are manually determined.

7) Fit to total cubic space… in proportion to existing

Adjust facings in any direction (high, wide, or deep) to fill out the total cubic space available in the planogram. Facings are proportionally adjusted based on the number of existing facings. A position with a high number of facings is expanded more than a position with a lower number of facings.

8) Fit to total cubic space… towards target facings

Adjust facings in any direction (high, wide, or deep) to fill out the total cubic space available in the planogram. Facings are adjusted for products having the greatest difference between their Capacity and Target Inventory values.

9) Fit to total cubic space… making space proportional to measure

Adjust facings in any direction (high, wide, or deep) to fill out the total cubic space available in the planogram. Facings are adjusted proportionally based on a selected measure such as Sales. Additional options are available for managing facings that are manually determined.

10) Average space to measure… keep within fixture limits

Adjust facings in any direction (high, wide, or deep) to balance products based on the ratio between a selected space definition and a measurement (such as Sales). For example, if you are comparing Width to Sales and the average Sales per linear foot equals $5 on the planogram, facings are added or removed to try to match the average. Additional options are available for managing facings that are manually determined.

11) Average space to measure… keep within total cubic limit

Adjust facings in any direction (high, wide, or deep) to balance products based on the ratio between a selected space definition and a measurement (such as Sales). For example, if you are comparing Width to Sales and the average Sales per linear foot equals $5 on the planogram, facings are added or removed to try to match the average. This option may result in some fixtures being overfilled while others have space remaining. Additional options are available for managing facings that are manually determined.

12) Average space to measure… no limits

Adjust facings in any direction (high, wide, or deep) to balance products based on the ratio between a selected space definition and a measurement (such as Sales). For example, if you are comparing Width to Sales and the average Sales per linear foot equals $5 on the planogram, facings are added or removed to try to match the average. This option may result in some fixtures (or the entire planogram) being overfilled. Additional options are available for managing facings that are manually determined.

13) Delete positions… with zero target inventory

This option will remove positions having zero as their Target Inventory value.

14) Delete Positions… with zero measure

This option will remove positions having zero as their value for the selected measure (such as Profit).